Страница 1 из 1

PC version: is Bluesoleil supported?

СообщениеДобавлено: 08 июн 2013, 05:06
Byrd
Hi,

I posted on here some months back about getting a Win CE 6.0 Chinese GPS running with Hobdrive, but gave up as the OS was so severely stripped and refused to work with a USB or BT OBDII adapter.

Now it's been hacked with a HDMI screen, carPC and Centrafuse car front end software (running Bluesoleil stack for GPS) :) Fired up the Windows version of Hobdrive ... it doesn't detect any BT drivers.

Should Bluesoleil work with hobd?

Thanks

JB

Re: PC version: is Bluesoleil supported?

СообщениеДобавлено: 20 июн 2013, 08:48
cail
Hi Byrd,

Probably not directly.

But you always can manually assign ELM device with a COM port number, and use that port in hobdrive to connect.

That should be supported with any BT stack.

Re: PC version: is Bluesoleil supported?

СообщениеДобавлено: 16 ноя 2013, 13:46
Byrd
Hi,

I'm still having no luck with Bluesoleil and HobDrive. I'm successful with a USB OBD2 adapter, but can't get BlueSoleil 10 + reasonable quality BT USB adapter (+ OBD2 dongle) to connect.

Using EasyOBD2 as a test, I can confirm COM6 and baud 38400 works using the above setup. Hobdrive detects this as COM6:38400 in hobdrive's OBD2 setup. I've tried every combination of baud rate, etc. but to no avail - it simply doesn't register with Hobdrive.

cail, any tips?

JB

Re: PC version: is Bluesoleil supported?

СообщениеДобавлено: 16 ноя 2013, 18:57
cail
Byrd,

Its abit ambiguous - are you able to connect via mapped com port? with BT COM ports you normally don't have to choose any specific speed.