Intallation on Windows Embedded CE firmware

hobDrive installation and configuration on Windows/Windows Mobile devices.

Intallation on Windows Embedded CE firmware

sgcamusso » 19 окт 2012, 17:04

Hi, I'm planning to install a DNX-6980 Kenwood dvd/nav unit wich I understand runs on own firmware based on Windows Embedded CE.
Does anyone know if hobdrive can be somehow installed in it?
Thank you.
Новичок
 
Сообщения: 2
Зарегистрирован: 18 окт 2012, 22:58

Re: Intallation on Windows Embedded CE firmware

cail » 20 окт 2012, 20:24

Hi, If that's a win ce 5 or 6 - hobdrive will run fine most probably. the main question though is how difficult it will be to attach ELM327 to your unit.
HobDrive(свежак) + Android4 rk3188 2din + Elm327USB + Pontiac Vibe 2003
Не пишите пожалуйста вопросы в личку. Создавайте тему в соответствующем форуме.
Аватара пользователя
Администратор
 
Имя: Игорь
Сообщения: 4310
Зарегистрирован: 06 дек 2011, 15:49
Откуда: Нижний Новгород

Re: Installation on Windows Embedded CE firmware

sgcamusso » 22 окт 2012, 03:00

Thank you Cail. The DNX-6980 works with Garmin GPS software. It has Bluetooth capability but I understand it is only for phone hands free operation. It also comes with an USB port for media but the manual does not include any instruction about how to load any additional software, only about how to update the firmware out of Kenwood or Garmin releases. Finally I dont't know if the firmware is based on WIN CE 5 or 6, just read somewhere about partnership among Microsoft and Kenwood about the soft used to drive the units. Could you gather some more information about possibility of installation of Hobdrive?
Новичок
 
Сообщения: 2
Зарегистрирован: 18 окт 2012, 22:58

Re: Intallation on Windows Embedded CE firmware

Pangadaywalker » 23 ноя 2012, 03:39

Question...
I have a GPS and I believe it has BT on it.

I just need to take the folder into the SD Card and then map the EXE file to start the application?

Would that be it in the WinCE5?

Let me know, because then I will try to convert my GPS to dash board and leave my phone alone. :P
Новичок
 
Сообщения: 5
Зарегистрирован: 22 ноя 2012, 15:28

Re: Intallation on Windows Embedded CE firmware

cail » 23 ноя 2012, 09:41

sgcamusso, unfortunately I cant fetch more information on your unit. from what I know is that Garmin often do not use WinCE platfrom.
HobDrive(свежак) + Android4 rk3188 2din + Elm327USB + Pontiac Vibe 2003
Не пишите пожалуйста вопросы в личку. Создавайте тему в соответствующем форуме.
Аватара пользователя
Администратор
 
Имя: Игорь
Сообщения: 4310
Зарегистрирован: 06 дек 2011, 15:49
Откуда: Нижний Новгород

Re: Intallation on Windows Embedded CE firmware

cail » 23 ноя 2012, 09:42

Pangadaywalker,

Yep, that should defenitely work even on WinCE5. But use hobd-standalone package.
After start, checkout OBD settings dialog to check if hobdrive correctly sees your BT stack.
HobDrive(свежак) + Android4 rk3188 2din + Elm327USB + Pontiac Vibe 2003
Не пишите пожалуйста вопросы в личку. Создавайте тему в соответствующем форуме.
Аватара пользователя
Администратор
 
Имя: Игорь
Сообщения: 4310
Зарегистрирован: 06 дек 2011, 15:49
Откуда: Нижний Новгород

Re: Intallation on Windows Embedded CE firmware

altijarah.uk70578 » 04 фев 2014, 02:49

hi,
can sombody please explain how to install hobd on my wince os? how is the file run/installed on the stereo?
thanks guys
cheers
Новичок
 
Сообщения: 2
Зарегистрирован: 04 фев 2014, 02:43

Re: Intallation on Windows Embedded CE firmware

cail » 04 фев 2014, 11:04

Hi, unfortunately thats not always easy process. You have to have some experience, read on "unlock wince desktop", this'll give you a clue
HobDrive(свежак) + Android4 rk3188 2din + Elm327USB + Pontiac Vibe 2003
Не пишите пожалуйста вопросы в личку. Создавайте тему в соответствующем форуме.
Аватара пользователя
Администратор
 
Имя: Игорь
Сообщения: 4310
Зарегистрирован: 06 дек 2011, 15:49
Откуда: Нижний Новгород

Re: Intallation on Windows Embedded CE firmware

altijarah.uk70578 » 04 фев 2014, 11:58

Thanks Cail, link to the thread please. I cant find it.
Новичок
 
Сообщения: 2
Зарегистрирован: 04 фев 2014, 02:43

Re: Intallation on Windows Embedded CE firmware

cail » 06 фев 2014, 14:53

We don't have much discussions in english of this topic. I may only suggest you to search internet for this.
HobDrive(свежак) + Android4 rk3188 2din + Elm327USB + Pontiac Vibe 2003
Не пишите пожалуйста вопросы в личку. Создавайте тему в соответствующем форуме.
Аватара пользователя
Администратор
 
Имя: Игорь
Сообщения: 4310
Зарегистрирован: 06 дек 2011, 15:49
Откуда: Нижний Новгород

Re: Intallation on Windows Embedded CE firmware

knasson » 01 июн 2014, 09:08

hi,
even if hobdrive works under wince and sees the bluetooth dongle how do you manage the start in order to let me choose either the GPS software installed in the device or hobdrive?

thank you for your help..
regards
K
Новичок
 
Сообщения: 3
Зарегистрирован: 31 май 2014, 09:13

Re: Intallation on Windows Embedded CE firmware

cail » 14 июн 2014, 23:26

Hi,

The simple solution - just replace GPS software with hobdrive executable.

The generic software - replace it with common script/tool, which starts third party UI shell AND hobdrive.
HobDrive(свежак) + Android4 rk3188 2din + Elm327USB + Pontiac Vibe 2003
Не пишите пожалуйста вопросы в личку. Создавайте тему в соответствующем форуме.
Аватара пользователя
Администратор
 
Имя: Игорь
Сообщения: 4310
Зарегистрирован: 06 дек 2011, 15:49
Откуда: Нижний Новгород

Wifi support

haulik.tamas73875 » 30 мар 2016, 21:34

Can WinCe version of HD Support wifi connection?
Аватара пользователя
Новичок
 
Сообщения: 6
Зарегистрирован: 16 фев 2016, 10:08

Re: Intallation on Windows Embedded CE firmware

cail » 31 мар 2016, 05:30

Hi, Yes, sure. read user manual on how to setup connection.
HobDrive(свежак) + Android4 rk3188 2din + Elm327USB + Pontiac Vibe 2003
Не пишите пожалуйста вопросы в личку. Создавайте тему в соответствующем форуме.
Аватара пользователя
Администратор
 
Имя: Игорь
Сообщения: 4310
Зарегистрирован: 06 дек 2011, 15:49
Откуда: Нижний Новгород

Re: Intallation on Windows Embedded CE firmware

marcioney » 01 апр 2016, 23:36

Dear,
The Hobdrive works in a unit wince 5.0 with ELM 327 USB? I did install the system but an error message and even the software performs.
Error message:
ERROR
HOBD.EXE
ArgumentException
An error message cannot be displayed bacause an optional resource assembly containing it cannot be found.

Help.
Аватара пользователя
Новичок
 
Сообщения: 1
Зарегистрирован: 01 апр 2016, 21:58

Re: Intallation on Windows Embedded CE firmware

cail » 04 апр 2016, 18:39

Hello, you probably need hobdrive standalone version.
hobdrive works on WinCE5 units.
HobDrive(свежак) + Android4 rk3188 2din + Elm327USB + Pontiac Vibe 2003
Не пишите пожалуйста вопросы в личку. Создавайте тему в соответствующем форуме.
Аватара пользователя
Администратор
 
Имя: Игорь
Сообщения: 4310
Зарегистрирован: 06 дек 2011, 15:49
Откуда: Нижний Новгород

Re: Intallation on Windows Embedded CE firmware

laercioamancio » 19 дек 2016, 14:29

Hi,
I have a Mitsubishi Lancer X 2.0 CVT Gasoline 2012 (Japanese version) and I installed the Hobdrive (WinCE version) in Roadrover D2280 multimedia.
I stabilished the connection with the ELM327 but only have battery voltage data is displayed in Hobdrive application.
Can you support me to solve this problem?

Thank you.
Аватара пользователя
Новичок
 
Сообщения: 1
Зарегистрирован: 19 дек 2016, 14:28

Re: Intallation on Windows Embedded CE firmware

kdika » 19 дек 2016, 22:15

Hi.
Screens/settings/vehicle settings:
-type: Mitsubishi CVT
-elm srting: ATSP6
FAQ: https://hobdrive.userecho.com/knowledge-bases/4-baza-znanij/articles
Уровень trace лога:экраны/настройки/системные настройки/отладочные логи/trace
Просьба сделать себе подпись:
HobDrive(1.6.25lic)+ZenFoneM1(9.0)+Elm327Carista+RenMegane3(SID305)
Аватара пользователя
Администратор
 
Имя: Дмитрий
Сообщения: 5690
Зарегистрирован: 31 дек 2013, 14:04


Кто сейчас на конференции
Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 8