In car gps/dvd

[stevem1986]

Hi Just wondering if you software will work on the following unit;

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=370594078193#ht_14075wt_1140

what sort of connector would you recommend usb or bluetooth and if so are any in particular more suited to your software?

regards,

steve

[cail]

Hi Steve,

It will, but you'll have to solder an external USB-host connector to it. Read the appropriate thread on this topic.

There could be a chance such a connector already exist on this unit (in that case it is normally referenced as "3G modem ready"). But from information above I have not found any references of it.

Both BT and USB ELM adapters will work fine as soon as you'll get a USB-host connector