Страница 1 из 2
Suzuki Kei (JDM)
Добавлено:
09 янв 2017, 13:56
theamila
Hi,
I have a Suzuki Kei Car (JDM) , with K6A engine. Hobdrive demo app is unable to connect to it. I'm sure that my adapter is working, because couple of other apps can connect to it.
I found out that it uses Suzuki K-Line protocol. But I couldn't find a similar one. I tried with all other available Suzuki car settings available in app, but no success.
Can you help on what settings to use? Is it supported in paid version?
Thanks..
Re: Suzuki Kei (JDM)
Добавлено:
10 янв 2017, 15:38
kdika
Hi.
Screens/Settings/Vehicle settings:
- vehicle type - Suzuki_JDM_KWP
- ELM Init Template - SuzukiKWP
Re: Suzuki Kei (JDM)
Добавлено:
14 янв 2017, 19:48
theamila
Hi kdika,
Thank you very much for your reply. I have tried tried that, but not successful.
It gives connection error threshold error.
Any idea why?
Re: Suzuki Kei (JDM)
Добавлено:
16 янв 2017, 11:37
kdika
theamila писал(а):I'm sure that my adapter is working, because couple of other apps can connect to it.
What app?
theamila писал(а):I found out that it uses Suzuki K-Line protocol
29/5000
Sure, that is not used CAN protocol?
Screens/Settings/Vehicle settings/System settings/Logging level - trace
try again with the auto connection setup
put the file log.txt
Re: Suzuki Kei (JDM)
Добавлено:
16 янв 2017, 14:51
theamila
Re: Suzuki Kei (JDM)
Добавлено:
16 янв 2017, 18:33
theamila
Log file also attached...
Re: Suzuki Kei (JDM)
Добавлено:
17 янв 2017, 02:17
kdika
put the 2 file log.txt from
Screens/Settings/Vehicle settings:
- vehicle type - Suzuki_JDM_KWP
1 Init string:
ATH1; ATSP5; ATAL; ATIB10; ATSH8101F1; ATST10; ATSW00; ATFI; 1A8E; 1A9A; 2100;
2. Init string:
ATSP5; ATAL; ATIB10; ATSH8101F1; ATST10; ATSW00; ATFI; 1A8E; 1A9A; 2100;
Re: Suzuki Kei (JDM)
Добавлено:
18 янв 2017, 06:50
theamila
Hi,
Log Files Attached...
Thanks for your effort...
Re: Suzuki Kei (JDM)
Добавлено:
22 янв 2017, 23:31
kdika
put the log.txt from Init string:
ATTP5; ATAL; ATIB10; ATSH8101F1; ATKW0; ATST32; ATAT1; ATFI; ATKW; ATSH8101F1; ATSW00; 1A8A; 2100; 1A8E; 1A9A;
Re: Suzuki Kei (JDM)
Добавлено:
23 янв 2017, 12:49
theamila
Log file attached...
Re: Suzuki Kei (JDM)
Добавлено:
23 янв 2017, 22:39
kdika
1. enable Developer Options
2. enable bluetooth HCI snoop log
3. connect auto app sz viewer
4. attache file btsnoop_hci.log
Re: Suzuki Kei (JDM)
Добавлено:
30 янв 2017, 19:04
theamila
Got the Bluetooth log in the way you have mentioned...
Re: Suzuki Kei (JDM)
Добавлено:
31 янв 2017, 01:31
kdika
1. replace file hobd/ecu
2. put the file log.txt from
Screens/Settings/Vehicle settings:
- vehicle type - Suzuki_JDM_KWP
- Init string:
ATH1; ATTP5; ATAL; ATIB10; ATSH8101F1; ATST32; ATSW00; ATFI; ATSH8001F1; 1A8A; 1A8E; 1A9A; 1A91; 1A99; 2100; 2101; 18000000;
Re: Suzuki Kei (JDM)
Добавлено:
31 янв 2017, 15:33
theamila
Finally seems to be connected without errors, though the displayed values are wrong.
Log file attached...
Re: Suzuki Kei (JDM)
Добавлено:
31 янв 2017, 17:53
kdika
1. while make this line
ATTP5; ATAL; ATIB10; ATSH8101F1; ATST32; ATSW00; ATFI; ATSH8001F1;
2. All-Union and examined the amendments, if necessary.
Re: Suzuki Kei (JDM)
Добавлено:
07 фев 2017, 06:33
theamila
Thank you very much...
Most of the things seems to work fine with this setting...
But diagnostics (DTC) screen stuck at initializing, and not seems to read codes.
So is it a problem with ecuxml file? will a future version will replace it?
Re: Suzuki Kei (JDM)
Добавлено:
07 фев 2017, 15:59
cail
Theamila,
Demo version will not read out DTCs for Custom ECUs. You have to purchase hobdrive license for this.
With the next beta update there'll be a separate vehicle ECU type for your Suzuki.
Re: Suzuki Kei (JDM)
Добавлено:
13 фев 2017, 09:44
theamila
Sure.. I will definitely purchase. This is the best app of this category that I have tried..
Re: Suzuki Kei (JDM)
Добавлено:
27 фев 2017, 07:13
theamila
Now I have the full version. Everything else seems fine, but still the DTC doesn't show anything. WHy?
Re: Suzuki Kei (JDM)
Добавлено:
27 фев 2017, 09:51
kdika
Insert into ecuxml code:
- Код: Выделить всё
<parameter id="MIL">
<class>KWPMILSensor</class>
<raw>18000000</raw>
</parameter>
<parameter id="PMIL">
<class>KWPPMILSensor</class>
<raw>18000000</raw>
</parameter>
<parameter id="ClearDTC">
<raw> 140000 </raw>
</parameter>