Suzuki Jimny M13A engine 2017

[ahaghshenas]

Hello,

OBD dongle : OBDLINK MX

I have read the forum for settings with other Suzuki cars, I have similar issues!

I can only connect to my car with SZ viewer app, with Hobdrive there is an error (bus init error) when connecting.

Settings used
Screens/Settings/Vehicle settings:
- vehicle type - Suzuki_JDM_KWP11
- ELM Init Template - SuzukiKWP

I have attached a trace log file and a btsnoop of SZ viewer

[kdika]

Hello.

Suzuki Jimny M13A engine 2017

You have a new car with a CAN bus

Settings used
Screens/Settings/Vehicle settings:
- vehicle type - Suzuki_JDM_KWP11
- ELM Init Template - SuzukiKWP

Try it like this
Screens/Settings/Vehicle settings:
- vehicle type - Standard OBD2
- ELM Init Template - select protocol 6

Send me log.txt (logging level trace)

[ahaghshenas]

Thanks for your quick response.

I have attached the files.

I have a different error now, error timeout

[kdika]

Make changes.
Screens/Settings/Vehicle settings:
- vehicle type - Suzuki_JDM_KWP11
- ELM Init - ATSP6; ATAL; ATSH7E0; ATST32; ATAT0; 1A8A; 1A8E; 1A9A; 1A91; 1A99; 2100; 2101;

the start of the system log is not necessary.

Run auto and run programm.
Send log.txt.

PS. Sensor values may not be correct

[ahaghshenas]

New log file attached

Yes it connected with wrong values.


Thanks

[kdika]

excellent
it takes several days to finalize the protocol
how will the test version be ready - I'll write here

[ahaghshenas]

Thank you for your help.

Look forward to receive the test version

[kdika]

Install demo version 1.5.38: https://drive.google.com/file/d/1oejYpk ... sp=sharing
Screens/Settings/Vehicle settings
- vehicle type - Suzuki_JDM_CAN

read/clear dtc work in full version

[MartyGek]

Hi I want 04-05 ZX10R Kawasaki front forks for my Suzuki GSX-R 1100 -94.
Is there anyone which would have done this before?
Thanks