beta 1185 : sensors in sensors list all working

Help on hobdrive connection with vehicle, parameters configuration

beta 1185 : sensors in sensors list all working

yillw » 22 авг 2013, 16:57

mode06_gm_canvehicles.pdf
(41.27 КБ) Скачиваний: 2002
gm specfic pids.txt
(658 байт) Скачиваний: 1063


Hi Cail,

Happy to report that the sensors in the sensor list page are working again for me. Thanks.
I have attached two files, in one are just a few sensors that I hope you can help me set them up.
In the GM mode6 pdf file, I am just wondering if it is possible to setup the misfire counters.

I know these may be too much to ask for you to help me with these sensors, so I would like to thank you in advance even if there are not enough information for you to get going with it or there are too complicated to merage into hobdrive.

Thanks Cail, thanks for hobdrive.
Начинающий
 
Сообщения: 11
Зарегистрирован: 31 май 2013, 06:55

Кто сейчас на конференции
Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 7